Demountability in Timber Construction: Deconstruction, Re-Use and Performance Comparison
Timber connections are well researched, but their suitability for a circular life cycle has hardly been examined. Common connection types were developed without demountability as a goal, and reliable values for load-bearing capacity, slip and creep after repeated assembly and disassembly are missing. The project aims at a design methodology that integrates demountability and reusability as verifiable parameters into standards such as Eurocode 5.
An experimental programme at the Materials Testing Institute (MPA) Stuttgart examines screwed connections, dowelled connections with slotted-in steel plates and glued-in threaded rods in glued laminated timber and beech LVL over three assembly and disassembly cycles, partly under climatic cycles. Large-scale timber trusses verify the transfer to real structures. Disassembly effort, tools and material losses are quantified. Validated FEM models extend the results to further timber species, geometries and connection types.
The project delivers (1) an experimental database on load-bearing capacity, slip and creep of demountable connections after repeated use, (2) a design methodology compatible with Eurocode 5 that treats demountability as a verifiable parameter, and (3) practical recommendations and a guideline for engineers and carpenters, prepared as a basis for standardisation committees.
At the University of Stuttgart, the Institute of Building Structures and Structural Design (ITKE) coordinates the project and develops models and design methodology. The tests are planned and carried out together with the MPA Stuttgart. The Institute of Construction Materials (IWB), Timber Engineering, advises on test planning and evaluation. The project is Associated Project AP 85 of the Cluster of Excellence IntCDC.
"Circular Timber Connections" is an associated project of the Cluster of Excellence IntCDC.
Project Team
ITKE Institute of Building Structures and Structural Design, University of Stuttgart
Prof. Dr.-Ing. Jan Knippers, Jan-David Kleefeldt, M.Eng.
Partners
Adolf Würth GmbH & Co. KG (Research & Development), Germany
Zimmerei Fleck, Weinstadt, Germany
Schnetzer Puskas Ingenieure, Basel, Switzerland
eins Plan GmbH, Germany
SWG Engineering, Germany
Simon Mönch (former Visiting Professor, University of Stuttgart)
External Links
Zukunft Bau project page, reference 10.08.18.7-26.01
IntCDC Associated Project AP 85
Project Funding
The project is funded by the Federal Institute for Research on Building, Urban Affairs and Spatial Development (BBSR) within the Zukunft Bau research funding programme under reference number 10.08.18.7-26.01.
Contact
Jan-David Kleefeldt
M.Eng.Research Associate